Better water. On your terms.
Remove fluoride, heavy metals, PFAS, and microplastics. Cold, hot, or ambient water instantly. No installation needed.
Water Filtration System Ships in 24h Mon-Fri
Why upgrading your water matters
If it's in your tap water, it's probably not meant to be in you. Whilst tap water meets basic standards, many households prefer to reduce elements that affect taste and health.
Whether you're drinking tap water or using a basic filter, here's what makes the difference.
What gets removed
+Fluoride: 94.4% reduction
Tap water gives you no choice. Rippl reduces fluoride significantly so you can control your family's intake. Jug filter cannot do this.
+Heavy Metals: All non-detectable
All 24 tested metals removed below 0.001 mg/L. Lead, arsenic, cadmium. Gone. Tap water and jug filters miss these completely.
+Chlorine: 99%+ removal
Chlorine drops from 2 mg/L to non-detectable. Tea tastes richer. Coffee tastes smoother. No chemical taste.
+PFAS (Forever Chemicals): 100% removed
All 28 PFAS compounds non-detectable. They accumulate in your body. You stop it today. 1,000x lower than NHMRC old limits.
+Microplastics: 100% blocked
RO membrane is 0.0001 microns. Microplastics are 5–100 microns. They can't get through. Jug filters don't block them at all.
One system for cleaner water at home
Rippl Pure combines reverse osmosis filtration, instant temperature control, and simple setup in one everyday system. Cleaner, better tasting water is ready when you need it.
Filtration performance you can see and taste
Most water solutions cannot remove the full range of contaminants that affect taste and health. Rippl Pure uses multi-stage reverse osmosis filtration to reduce chlorine, fluoride, PFAS (forever chemicals) heavy metals, microplastics & more, delivering clean, consistent water every day.
Water at your preferred temperature, instantly.
Rippl Pure delivers ultra clean water from as cold as 6°C to as hot as 100°C, with five preset temperatures designed for drinking, cooking, tea, and everyday use.
Cold — 6°C
Crisp water for drinking and everyday hydration.
Ambient — 25°C
Room temperature filtered water for daily use.
Lukewarm — 55°C
Gentle warm water for comfortable drinking.
Hot — 85°C
Ideal temperature for tea and hot drinks.
Very hot — 100°C
Hot water ready for cooking.
Set up in minutes. No installation required.
Rippl Pure is designed to work straight out of the box. Fill the removable tank with tap water, plug into power, and the system begins filtering immediately. No plumbing, technician, or permanent installation.
Designed for long term, low maintenance use
Rippl Pure has two replaceable, long-lasting filters.
The PAC filter lasts 6–12 months, and the reverse osmosis filter lasts 12–24 months depending on usage.
On-screen alerts tell you when to swap. Replacement is tool-free and takes under one minute.
Rippl® Pure vs. the rest
Year 1 cost & feature comparison. Real numbers.
| Rippl® Pure | Water Filter Jug | Bottled Water | Carton Water | |
|---|---|---|---|---|
| Year 1 Cost | ||||
| Upfront cost | $899 | $30–80 | $0 | $0 |
| Year 1 ongoing cost | Minimal | $519 | $1,499 | $2,160 |
| Year 1 Total | $899 | $549–619 | $1,499 | $2,160 |
| Features | ||||
| Removes 99%+ of contaminants | ||||
| Instant hot & cold water | ||||
| No heavy lifting | ||||
| Cost effective over time |
View cost breakdown & assumptions
Assumptions: 4-person household consuming 1.5L of water per person daily = 180L/month, or 2,160L annually.
- Rippl® Pure: One-time upfront purchase of $899. No plumbing. Minimal maintenance. Filters typically last 12 months.
- Water Filter Jug: Manufacturer recommendation: 2 filters/month at ~$21.63 = $519/year. Limited capacity & no instant heating.
- Bottled Water: $10 per 24-pack of 600ml = 14.4L → $0.694/L × 2,160L = $1,499/year.
- Carton Water: $10 per 10L = $1.00/L × 2,160L = $2,160/year.
Water that works for you.
Sam
Young professional
How Rippl Pure helps
I was already using a jug filter, but wanted better filtration plus hot and cold on demand. Now I get superior water quality I care about, plus the convenience I needed.
Martha
Parent with kids
How Rippl Pure helps
My kids actually ask for water now because they like the taste. No fluoride I didn't choose. No heavy metals from old pipes. I control what goes into their bodies every single day.
Hatem
Health-conscious
How Rippl Pure helps
Removes what I didn't want. Rippl Pure filters out fluoride and PFAS which most other filter systems can't do.
Anna
Busy professional
How Rippl Pure helps
I love drinking tea in the evenings. Since getting Rippl Pure, I've thrown out my kettle which had limescale at the bottom and now enjoy drinking tea even more since I can taste how clean it is.
What You Get & How It Works at Home
01 Plug in & power on
Press and hold the red power button on the front of the display.
02 Fill the main tank with tap water
Remove the tank to fill it. Only fill the main compartment. The smaller compartment collects waste water during the reverse osmosis process.
03 Rinse the filters
Press and hold the rinse button for 3 seconds. Place a container under the spout until the indicator turns solid white.
04 Drain any remaining water
Place Rippl Pure over the sink. Remove the drain plug and allow any water to empty, then reinsert. If no water drains, this is normal and means the system is clean and ready.
05 Rippl Pure is ready to use
Refill the main tank, power on, and allow the system time to chill the water.
Rippl Pure filtration system
Connects to a standard 240V power outlet.
Filters installed
Ready to run once you complete the first rinse cycle.
Magnetic water tray
Snaps into place for clean, easy everyday use.
Removable tank with cover
Easy to lift out, fill, and place back in.
Instruction manual
Step-by-step setup and care.
Dimensions
Height: 367mm
Depth: 406mm
Width: 225mm
Replacing the filters
Long life filters pre-installed with on screen tracking. ① & ② turn orange at 20% lifespan & red at 0% lifespan. Simple, 30 second, tool free changeover.
PAC Filter
Filter ① corresponds to the PAC Filter. Lasts 6-12 months depending on usage. Polishes and enhances taste, removing odours, chlorine, and residual impurities for ultra-clean, crisp water.
Reverse Osmosis Filter
Filter ② corresponds to the Reverse Osmosis Filter. Lasts 12-24 months, depending on usage. Removes up to 99% of contaminants including fluoride, chlorine, microplastics, and heavy metals for ultra-clean, crisp-tasting water.
Warranty
Covered by Rippl's 12 month manufacturer warranty, with local support if you ever need help.
The science of water purity deserves precision. That's why we engineer advanced filtration systems that are independently tested and verified. Our goal is simple: deliver pure water without compromise, so your health isn't left to chance.
Lab-Verified. NATA Accredited. Independent Testing.
Chlorine & Microbiological Safety
Independent Laboratory Testing
Removal Rate
Chlorine: 100% removed
E. coli: Non-detectable
Bacteria: Eliminated
PFAS, Heavy Metals & Fluoride
Independent Laboratory Testing
Removal Rate
Heavy metals (24+): 100% removed
PFAS (28 compounds): 100% removed
Fluoride: 94.4% reduced
What Rippl® Pure is not
Rippl Pure uses active cooling and filtration, which creates a low, consistent operating sound. This is required to effectively filter and chill water. When not in use, the system can be turned off.
Rippl Pure is designed for everyday on-demand use, rather than continuously chilling large volumes like commercial plumbed systems.
Rippl Pure is a benchtop system that does not connect to plumbing, keeping setup flexible, affordable, and easy to maintain.
Hydration. Upgraded.
30 Day Guarantee
Try Rippl Pure at home. Return it for a full refund if you're not satisfied.
1-Year Warranty
Complete coverage on all components. We stand behind our filtration.
Affordable Filters
Replacement filters globally available. Simple swaps, no hidden costs.